◆Error Codes Wiki

HP Printer Error 50 — Fuser Error

Criticalhp

Overview

HP printer error 50 indicates a fuser assembly malfunction. The fuser heats toner to bond it to paper.

Key Details

  • 50.X error — X indicates specific fuser fault
  • Fuser too hot (50.1), too cold (50.2), or slow (50.3)
  • Prints may come out with unfused (smeared) toner
  • Fuser unit may need replacement

Common Causes

  • Fuser assembly failure or wear
  • Power supply issue not providing enough voltage
  • Incorrect fuser installed for the printer model
  • Ambient temperature too cold for fuser operation

Steps

  1. 1Power cycle the printer and wait 5 minutes for fuser to cool
  2. 2Check that the correct fuser is installed for your model
  3. 3Ensure adequate power — avoid using extension cords
  4. 4If persistent, replace the fuser assembly

Tags

printerhphp error 50 fuserfixtroubleshooting

More in Hp

hp-error-13-paper-jamHP Printer Error 13 — Paper Jam
Warning
hp-error-49-firmwareHP Printer Error 49 — Firmware Error
Error
hp-error-79-critical-firmwareHP Printer Error 79 — Critical Firmware Error
Critical
hp-error-59-motorHP Printer Error 59 — Motor Error
Error

Frequently Asked Questions

The fuser uses heat and pressure to permanently bond toner powder to paper.